Home / Reference Tools / Waterproofing

Waterproofing Concrete

If you want to waterproof your concrete or need to handle an existing problem, you're in the right place. We handle a full line of XYPEX waterproofing products.

XYPEX Concentrate

XYPEX Concentrate is the most chemically active of the XYPEX waterproofing products. When mixed with water, this light grey powder is applied as a slurry coat to above-grade or below-grade concrete either as a single coat or as the first of a two-coat application. It is also mixed n Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs.

› Download XYPEX Concentrate Data Sheet

XYPEX Modified

XYPEX Modified can be applied as a second coat to reinforce XYPEX Concentrate or by itself to damp-proof the exterior of foundation walls. Applied as a second coat over Concentrate, Modified produces a harder finish and speeds the curing of the Concentrate. Where damp-proofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion.

› Download XYPEX Modified Data Sheet

XYPEX Admix C-1000 and C-2000

With the Admix C-Series, XYPEX’s unique crystalline dry power compounded for the waterproofing, protection and improvement of concrete is added to the concrete mix at time of batching. Admix C-1000 and C-2000 heave each been formulated to meet specific project and temperature conditions. Both XYPEX Admixes are available in a no fines grade.

› Download XYPEX C-1000 Data Sheet

XYPEX Patch'n Plug

XYPEX Patch'n Plug is formulated as a crystalline, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete repairs. It stops flowing water in seconds and is used to seal cracks, fill tie-holes and other defects in concrete.

› Download XYPEX Patch'n Plug Data Sheet

Avoid potential water damage to your next concrete project with XYPEX Waterproofing! Contact your local Mayco Mix sales representative.

Call us today, 250-722-0064